Oil For Scania – What oil is needed for Scania HGVs.

Knowing the best oil to use in your Scania is very important as the oil is one of the most important elements in keeping your engine healthy. Engine oil is sometimes compared to been as vital for an engine as blood is to a body. The engine oil in your Scania keeps the engine’s parts moving whilst also protecting them.

Different Oils for Scania

For HGV engines it has become more complex as the new generation engines have more requirements to ensure they meet the stringent rules set down by the E.U. Depending on the engine in your Scania truck you are going to require a 10W/30, a 10W/40 or a 15W/40 heavy duty diesel engine oil all of which need to meet the Scania specification relevant to your engine. However it is more advisable that you always look for the top international branded oils that have the full approval from Scania for the specifications, as you are guaranteed quality oil that has been fully approved by your trucks manufacturer. This is especially preferred when your Scania is still under warranty as using an un approved oil means you run the risk of voiding your warranty if when tested the oil that states it meets the requirement does not pass the test which could happen.

Fully Approved Total Oils for Scania Engines

Below are the Total Rubia engine oils that are approved by Scania for use in Scania HGV engines, all of which are available from Finol Oils Ltd in Dublin.

ProductBulk208L Barrel20L Drum3x5L18x1L
Total Rubia TIR 8900 FE 10W/30
Low SAPS | ACEA: E6/E7/E4-99 issue 3 | Scania Approval: Scania Low Ash
Total Rubia TIR 8900 10W/40
Low SAPS | ACEA: E6/E7/E4-99 issue 3 | Scania Approval: Scania Low Ash
Total Rubia TIR 8600 10W/40
ACEA: E4/E7 | Scania Approval: Scania LDF-3
Total Rubia TIR 7900 15W/40
Low SAPS | ACEA: E9/E7 | Meets the Requirements of Scania
Total Rubia TIR 7400 15W/40
ACEA: E7 | Meets the Requirements of Scania

Finol Oils, 3 Stannaway Drive Crumlin Dublin 12 | Tel:+353 01 4555484

preloader